saludos disculpen si me pueden ayudar con el recobery y el loader de este nuevo deco.
azamerica s930a
Atençao: Caso a atualizaçao esteja compactada, use o Winrar ou 7ZIP para descompactar/extrair clique no link >Extrair/Descompactar
Nota: Caso nao tenha localizado a atualizaçao desejada use a busca do blog na barra fixada acima,temos muito conteudo aqui
-----------------------------------------------------------------
0 COMENTÁRIOS EM “azamerica s930a”
Deixe um comentário
Que eu saiba ainda não saiu att para ele
Enquanto isto vai dando uma olhada nas especificações dele : http://www.atualizasat.com/showthread.php/9587-Novo-clone-azamerica-s930a?p=52174&posted=1
JANETE
Ver ComentarioTvsatcolombia.com
Ver Comentariotrata se 1 clono parecido com o s 900 + e furada pessoal
Ver ComentarioÉ verdade Mattei? Já te deparou com ele?
JANETE
Ver Comentariopessoal….. eu consegui fazer esse deco s930a florir….
EDITADO – SEM LINKS DE SITES NO FORUM
ou no link: http://www.4shared.com/zip/G0aeyzR-/AZAMERICA_S930A_v10.html
obrigado.
JANETE
Ver ComentarioNo tienen el recovery ya que el loeder se lo podemos hacer con el del bavisimo twin ya lo probé pero no tengo el recovery
Ver ComentarioEsta area aqui é do azamerica.
Dá uma navegada aqui http://www.atualizasat.com/showthread.php/2992-Bravoo-HD-Bravoo-HD-Plus-power-on-travamentos-recuperao?highlight=recovery
JANETE
Ver ComentarioAi Pessoal bom dia, comprei um deco desses e recebi via e-mail do vendedor esses dados para atualização e configuração.
Esta em inglês mas é só traduzir pelo google tradutor que da certinho.
espero ter ajudado
Eu Já comprei o deco, agora é esperar e configurar e torcer pra florir.
segue informações do vendedor na integra.
How to Set Satellite Key Sharing (SKS) Function in Az AmericaS930A
With our Az America S930A receiver, you can decode/fight against Nagra 3 channels, for there is i-box function built in Az America S930A receiver. This HD, i-box built-in and cost-effective receiver is your best choice. And this is why our receiver is outstanding among varieties of receivers.
WARNING: Before you go through these steps as below, please load our patch software into the receiver first.
Here is how to set Satellite Key Sharing (SKS) Function in Az AmericaS930A.
1. Press the “MENU” button in the remote then enter “Antenna Setup” menu (Figure 1).
Figure 1 Enter “Antenna Setup”
2. Press “F2” button in remote to configure antenna.
Press “F2” button in remote to configure antenna. Please follow Figure 1 to set the configuration of antenna. Press “LEFT” and “RIGHT” button to select the appropriate options.
The connection type is “Dual (Different)”.
LNB1 is set to “Fixed Antenna”.
LNB2 is set to “Fixed Antenna”.
LNB Power is set “On”.
After finish the procedures above, please press “OK” button in the remote to save and exit.
3. Press digit “9” in the remote 4 times to process further setup.
To complete the configuration, there is a hidden menu for SKS function. Press digit “9” in the remote 4 times to active one hidden menu to finish the SKS setup (Figure 2). Please follow figure 2 to configure the function.
Mode is set to “DBN”.
Active is set to “On”.
Then roll down to “Apply” and press “OK” button in the remote to save the configuration.
Figure 2 set the hidden LNB configure menu
4. Configure the LNBs and Antennas.
Tips: LNB2 FOR NAGRA3 CRACK CODE ONLY
In S930A, LNB1 is for TV programs. LNB2 is ONLY for the code to crack Nagra 3 channels. Please follow figure 3, figure 4 and figure 5 to configure LNB2. Please set the antenna of LNB2 to receive the signal of Hispasat 30.0°W.
Note: In Figure 4, you can check ONLY one satellite for crack code signal.
5. Configure satellite working mode.
Press “MENU” to enter the receiver’s configuration. Then move to “Installation” menu to set up satellite working mode (Figure 4).
Tips: LNB2 FOR NAGRA3 CRACK CODE ONLY
Use LNB2 to receive the code to decode Nagra 3 channels, just check Hipasat in the checkbox under LNB2 label. You can check ONLY one satellite under LNB2 label (Figure 5). Use LNB1 to receive the TV programs, please select the proper satellite under LNB1 label. For example, if you want to watch the programs in “Atlantic Bird 3” satellite, please follow figure 3 to setup the antennas and follow figure 4 to check LNB1 and LNB2 for decoding Nagra 3 channels of Atlantic Bird 3.
Note: For LNB2, you can check ONLY one satellite for crack code signal.
6. Set up your channels.
Please select the satellite that is used to receive TV programs and the press “F1” in remote to conduct the TV program search.
7. Enjoy your Nagra 3 channels.
Figure 3 Configure LNBs
Figure 4 Configure Satellite working mode
Figure 5 you can check ONLY one satellite under LNB2 label.
Ver Comentario